Get Qualified to Safely Operate a Forklift
The Licence to Operate a Forklift Truck (TLILIC0003) course teaches you the practical skills and confidence to safely operate a forklift in a range of workplace environments. You’ll gain hands-on experience with correct operating procedures, load handling, pre-start checks, and hazard management - all through realistic, workplace-focused scenarios.
This nationally recognised qualification is essential for anyone working in warehouses, logistics, construction, or similar industries. By the end of the course, you’ll be ready to operate a forklift safely, efficiently, and in full compliance with workplace safety regulations.
Course Delivery
Face-to-Face training
Course Duration
3 days
Course Outcome
Locations
17+ training centres across Queensland and Western Australia
Course Fee
Fees vary depending on location (see table below)
Afterpay available
You Pay
CSQ and CTF Funding available
Licence to Operate a Forklift Truck - Course Information
The Licence to Operate a Forklift Truck course provides you with the practical knowledge and hands-on experience to safely operate a forklift. You’ll learn about:
Legislation & Compliance: Understand WHS and workplace requirements for forklift operation.
Hazard Identification: Learn to identify workplace hazards and operational risks.
Risk Assessment & Planning: Plan safe operations and implement control measures.
Pre-Start Checks & Maintenance: Inspect forklifts and perform routine safety checks.
Load Handling Techniques: Safely load, stack, and move materials.
Safe Operating Procedures: Operate forklifts efficiently while minimising risks.
Emergency Procedures: Respond effectively to incidents and workplace emergencies.
Shutdown Procedures: Shut down and secure the forklift truck after operations.
Communication & Reporting: Report hazards and incidents in line with workplace procedures.
By the end of the course, you’ll be confident in your ability to operate a forklift safely, manage hazards, and comply with workplace safety standards.
Course delivery and assessment
Due to the high-risk nature of operating forklifts, the Licence to Operate a Forklift Truck course is delivered face-to-face over three full days. You’ll gain hands-on experience in a controlled environment, building both confidence and competence while receiving direct guidance and personalised feedback from experienced trainers throughout the course.
High Risk Work Licences
After successfully completing this course, you can apply for your High Risk Work Licence (HRWL) through WorkSafe QLD. You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.
HRWLs are valid for five years and can be renewed online via the WorkSafe QLD website. If your licence expires, you are no longer recognised as a licensed operator until it is renewed. WorkSafe QLD provides a 12-month grace period for renewal; if this period passes, you will need to re-sit both the written and practical assessments.
For those looking to refresh their skills and stay current with the latest safety and compliance standards, Civil Safety offers a range of high-risk refresher courses.
Who should complete this course?
This course is designed for people who want to enter or progress in the warehousing, logistics, construction, or mining industries, those who need a High Risk Work Licence to operate a forklift, or anyone looking to improve workplace safety and efficiency in load handling.
Ideal for:
Warehouse and logistics workers
Construction and maintenance personnel
Operators and tradespeople required to use forklifts
Workers needing to meet organisational compliance
Whether you’re starting a new role, upskilling, or refreshing your licence, this course will teach you how to operate a forklift safely, efficiently, and in full compliance with workplace regulations.
Career pathways
Warehouse and logistics: Warehouse supervisor, logistics coordinator, distribution centre controller
Construction and Civil Works: Site supervisor, materials handler, tradesperson
Mining and Resources: Plant and machinery operator, safety representative, team leader
Manufacturing and Industrial: Plant operator, production line supervisor, packing and dispatch coordinator
Entry requirements
You must satisfy each of the following criteria to enrol in this course:
You must be at least 18 years old (a requirement for High Risk Work Licences)
Wear steel-capped or safety boots to your session and PPE.
Basic computer skills and internet access (for enrolment and communication).
Sufficient language, literacy, and numeracy (LLN) skills to complete assessments.
A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.
Support when you need it
Throughout the duration of your course you can access experienced industry professionals and support staff to guide you through the program. Our trainers are dedicated to helping you succeed, and will be available to answer your questions and provide feedback on your progress. They will provide you with the guidance and support you need to fully understand the course material, as well as offer suggestions for further learning opportunities.
Related Courses to Further Your Career
Funding is Available For this Course
Construction Construction Skills Queensland (CSQ)
Eligible workers, employers and career seekers in Queensland’s building and construction industry can save up to 75-100% on courses, including short courses, units of competency, or Certificate and Diploma qualifications. While CSQ provides substantial funding, a student co-contribution fee is typically required. Check your eligiblity or contact us for more information.
Construction Training Fund (CTF - WA)
Eligible apprentices, trainees, workers and business owners in WA’s building and construction industry can save up to 70% per course (metro) and 80% per course (regional) with CTF funding. As an approved bulk billing provider, we handle the paperwork and claim process for you - so you only pay the gap while you upskill, get licences, and complete safety courses. Check your eligibility or contact us for more information.
Completing the forklift course was one of the best career decisions I’ve made. The trainers were supportive, the hands-on practice gave me real confidence, and I walked away with the skills I need to operate safely and professionally. Having my forklift licence has already opened up new job opportunities in warehousing and logistics that I wouldn’t have had before.
Upcoming Courses
Showing - of courses Showing of courses
No courses found matching your filters.
No courses available at this time. Check back soon!
$
-
-
-
-
👥
spaces available
No courses found matching your filters.
No courses available at this time. Check back soon!
- ...
Course FAQs
Fees vary depending on location - you can view specific location fees in the table above.
Yes - you may be eligible for either CSQ (QLD) or CTF (WA) subsidies for this course. Check your eligibility or contact us to find out more.
This course is delivered face-to-face over 3 days.
Yes, you must satisfy each of the following criteria to enrol in this course:
Must be at least 18 years old
Wear steel-capped or safety boots to your session and PPE
Basic computer skills and internet access (for enrolment and communication)
Sufficient language, literacy, and numeracy (LLN) skills to complete assessments
A valid Unique Student Identifier (USI) - mandatory for all nationally recognised training. If you don’t have one, you can apply at usi.gov.au or we can assist.
After successfully completing this course, you can apply for your High Risk Work Licence (HRWL) through WorkSafe QLD. You have 60 days from course completion to submit your application. If you prefer, we can apply for the licence on your behalf for an additional fee of $100.
Your SOA will be issued within 3-5 business days of successfully completing the course and receiving payment.
Have Questions?
Our friendly support team is here to help. Whether you need course advice, enrolment support, or guidance during your training, we’re only a call or message away.
Speak with Our Team
Call us now and we'll connect you with the right training specialist for your needs.
Call 1300 248 457
Send Us an Enquiry
Fill out a quick form and we'll get back to you with the information you need.
Submit Enquiry